Buckleys Spark Tester Kit

Specialist test equipment

The PST-100 Spark Tester provides a quick and cost-effective method of inspection on thick coatings and linings. Coating thicknesses of between 3mm and 30mm can be tested.

It is widely used for testing butt-welded and overlap joints in the plastics and rubber, petro-chemical, pipeline construction and many other industries.

A flexible probe is included with the unit but additional insulated extension rods and electrodes can be supplied if required. However, to ensure the stability of the output voltage, large electrodes should not be used. (The recommended maximum size is 150mm).


  • Lightweight
  • Mains powered
  • Adjustable output voltage
  • Power limited output for operator safety
  • Coating thicknesses of between 3mm and 30mm can be tested


  • Output voltage range: 10 – 55kV
  • Output: pulsed ring
  • UKCA and CE Compliant
  • Mains voltage: 110V AC 50/60 Hz
  • Mains voltage: 230V AC 50/60 Hz
  • Weight (unit only): 1.2Kg
  • Dimensions (unit only): 7.5 x 23 x 29.5cm
  • Packed weight (basic kit): 1.3Kg
  • Packed weight (standard kit): 2.3Kg
  • Packed weight (complete kit): 3.05Kg
  • Dimensions (basic kit – packed): 10cm x 33cm x 39cm
  • Dimensions (standard kit – packed): 16cm x 36cm x 45cm
  • Dimensions (complete kit – packed): 16cm x 36cm x 45cm

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

Plastral is the Australian agent for Buckleys range of testing equipment used in the construction, pipeline, medical and plastic fabrication industries.  A network of trained agents across Australia offers the complete range of Buckleys spark testers  and accessories together with technical information on all applications.

For further information or to speak to a Plastral representative about this product, please contact us here.