Dry Roof Pro – Leak Detector Kit

Find flat roof leaks in dry conditions

Buckley’s Dry Roof Pro’ Leak Detector Kit enables inspectors to quickly and effectively test non-conductive roof finishes (such as bitumen, liquid-applied, single-ply and asphalt) for pinholes, porosity and other defects.

The Dry Roof Leak Detector provides a rapid method of testing a wide range of roofing membrane types and thicknesses of between 64µ and 25.6mm. The kit contains everything required to start testing immediately (even batteries and charger), all contained in a robust, high-visibility transit case.

The Dry Roof Pro’ utilises the non-conductive properties of roof membranes as an electrical insulator. As the detector passes a defect in the membrane, the current required to complete an electrical circuit reduces due to the lower dielectric strength of the membrane. As an electrical
circuit is created, current ‘jumps’ the gap to earth; triggering the detector unit’s alarm.

Buckleys’ Dry Roof Pro’ can test up to 2,000m2 per day and can pinpoint the exact location of leaks and faults; even if they are invisible to the naked eye.

Buckley’s Roof Leak Detector Features:

  • Test up to 2,000m2 per day
  • Pinpoint leaks which are too small to see with the naked eye
  • Easy to use
  • Audible & visual alarm indicators
  • Clear LCD with back light
  • Automatic voltage selector
  • Accurate sensitivity control
  • Volume control for quiet environments
  • Membrane keypad operation
  • Microprocessor controlled
  • Power limited to avoid coating damage
  • One year back-to-base warranty
  • Wide range of accessories and electrodes available

Buckley’s Roof Leak Detector Kit contents:

The kit contains all of the items required to carry out the testing process.

  • Dry Roof Pro’ unit, interconnecting lead & probe handle
  • 2 x 332mm mid-section extension rods
  • 1 x 332mm end-section extension rod
  • Knurled thumb-nut & back-nut
  • 450mm phosphor-bronze brush electrode
  • Stainless-steel drum-brush electrode
  • Pointed probe electrode
  • Battery charger and 4 x rechargeable batteries
  • 5m earth lead on reel
  • 50m earth extension lead
  • Shoulder bag
  • Test voltage calculator
  • ESD Anti-static wristband
  • Instruction manual with calibration certificate
  • Supplied in robust, loam-lined transit case

Specifications:

  • Output voltage range: 2 to 40kV DC
  • Sensitivity range: 10 to 450μA (pre-set to 350μA)
  • Coating thickness range: 64μm to 25.6mm
  • Built-in test voltage formula: NACE SP0274
  • Battery type: D-Cell/LR20
  • Battery life: 8 hours approx.
  • Altitude: Up to 2000m
  • Unit weight: 1.64Kg
  • Unit dimensions: 172mm x 85mm x 235mm
  • Handle weight: 720g
  • Handle dimensions: 290mm x 85mm
  • Packed weight: 13.6kg
  • Packed dimensions: 510mm x 250mm x 630mm
For further information or to speak to a Plastral representative about this product, please contact us here.